iPad plays an important role in our daily lives. This device is very convenient, especially for photos, videos, music, documents, etc.
However, it can be heartbreaking to learn that your device has stopped ringing. No one likes a muted device, especially when using it for FaceTime, music, etc. I know you’re at this post because your iPad’s volume isn’t working. I can guess that you have tried different methods and now you are about to factory reset your iPad, but I recommend that you read this guide before doing a factory reset of your iPad.
To tell us what that is, we’ll take a look at some quick fixes below. We’ve put together ways to fix it if iPad volume isn’t working.
Test your speakers
- Plug in a pair of headphones and see if you can hear sound through the headphones and not through the device’s speakers.
- First, check if your iPad is stuck in headphone mode.
- If your iPad isn’t stuck in headphone mode, pull out your headphones and look closely at the speakers.
- Check for dust or any other type of dirt blocking the speaker’s screen.
- If they get dirty, gently clean them with a toothpick, dental brush, or microfiber cloth.
- Another option is to try blowing air into the speaker and see if any debris falls out.
- Don’t apply too much force, or you may end up pushing the dirt further away, causing other problems!
Check the hearing aid settings:
• Go to Settings>General>Accessibility.
• Move to Hearing section
• Mono Audio on and off when listening on and off
Mono Audio combines any stereo sound into a song so that it always comes out when paired with any speaker, including AirPods, EarPods, Bluetooth headphones, earphones, and any type of audio speaker any.
Check if iPhone is stuck in Headphone Mode
Sometimes our device hangs, thinking that the headset is connected when it is not. We call it “stuck in headset mode”.
To get rid of them, grab a pair of headphones and plug them into the iPad’s headphone socket and immediately unplug them. Do this many times.
Check your iPad’s mute switch
Let’s look at the most obvious and overlooked. Yes, I already said. While newer iPads don’t come with side switches, many older iPad models do. So check your iPad and make sure you didn’t accidentally turn the mute button on.
In general, when sharing your iPad with other family members at home, check this setting.
Check out the Do Not Disturb feature
Another setting to check is the iPad’s Do Not Disturb feature.
Go to Settings & gt; Do Not Disturb and make sure the feature is not turned on.
This setting can also be turned on or off through the Control Center.
Crescent-shaped search – if it’s highlighted, it’s on. Tap it once to turn it off.
Check Bluetooth.
Bluetooth is a wireless connection available for most digital devices, including smart speakers, etc. When Bluetooth on iPad is turned on, it connects to the Bluetooth device.
As a result, our audio is sometimes associated with a nearby or previously used Bluetooth accessory.
Turning off Bluetooth is the easiest way to check if audio is being routed to a connected device.
Go to Settings > Bluetooth and turn it off.
Restart your iPad.
The classic advice of turning your computer off and on again when the problem occurs is also a great way to troubleshoot your iPhone.
After your iPhone turns off completely, then the Apple logo will appear, at which point you can release the two buttons. Your phone will continue. As usual, hopefully any issues will be resolved.
1. On iPads without a Home button and iPhone X and later:
Press and hold the Side/Top/Power button and either volume button until the slider appears.
2. On an iPad or iPhone with a Home button, as well as on an iPod Touch:
• Hold the Side/Top/Power button until the slider appears.
• Drag the slider to turn off the device, then press and hold the Side/Up/Power buttons.
3. For iOS 11 and above
Reboot with Settings; Overview; Turn off.
After this soft reset, the sound should return to your iPad. If not, try the forced reboot.
How to force restart
• On iPhone 6S and earlier, as well as all iPads and iPod Touches with a home button, press Home and Power at the same time until you see the Apple logo.
• For iPhone 7 or iPhone 7 Plus, press and hold the Side and Volume Down buttons for at least 10 seconds or until you see the Apple logo.
• Press and quickly release the Volume Up button on an iPhone or iPad without a Home button, or on an iPhone 8 or iPhone 8 Plus. Then immediately press and release the Volume Down button. Finally, press and hold the side button until you see the Apple logo.
Restore your iPad to factory settings.
Don’t panic if the problem remains unresolved. You can try a factory reset of your iPad, but be aware: factory reset will erase everything on your iPad including your personal files and settings, so it’s best if you It is recommended to back up your iPad before doing so.
How can you make a backup?
- Connect your iPad to your computer and create an iTunes backup if possible. If iTunes is not available, back up to iCloud.
- Unplug the iPad from the computer and plug it into the charger – make sure the iPad is charging before continuing.
To factory reset your device:
1. After backing up, go to the Settings app on your iPad.
2. Click General, then scroll to Reset.
3. Click Erase All Content and Settings
When prompted, click through the warning messages.
Conclusion
The article talks about how to fix if your iPad volume is not working.
In most cases, the sound problem is caused by dust or any kind of dirt that causes the speaker cage to become clogged and thus not allowing sound to come out. If you’re having a similar problem, you don’t always need to make an appointment with Apple and have your device fixed. Sometimes, you can solve the problem on your own. That is why we have pointed out all the factors that can cause this problem and also provided you with solutions on how to fix it. If you still find your issue unresolved, you can contact customer care.
Also read: Is your Snapchat not working on iPhone? Here’s how to fix it
Categories: How to
Source: vothisaucamau.edu.vn
