Most Accurate Way to Install Windows 10 on Your PC

You can very easily install windows 10 on your device. There are many ways that you can use to get Windows 10. But you need to have precise knowledge of the techniques involved. Here we have prepared a beginning to end Microsoft guide to help you install Windows 10.

You can easily start installing Windows 10 from scratch or upgrade your old operating system to Windows 10. However, before starting the installation process, let’s prepare a few things so that you can easily Install Windows 10 on your computer. system.

Let’s start:

Back up your data:

Data can be backed up in many ways, one of which is using any cloud storage service platform, such as OneDrive folder. The OneDrive cloud storage platform will sync your documents, photos, and desktop using the steps given below:

1. From the taskbar, select the OneDrive Cloud option
2. Select More from the menu
3. Go to Settings from there
4. Click Backup
5. Now tap the option Manage Backup
6. Select the folder and data you want to recover
7. Click Start Backup

Or you can use an external drive to copy your data by following the steps below:

1. Go to File Explorer
2. Click This PC from the menu on the left
3. Browse the way; C:\Users
4. Right click on the folder of your choice and click Copy

Now open the folder location on the external drive

Right click and select “Paste”

Once you have completed the methods provided here below, follow the onscreen instructions to create a backup.

System Requirements for Windows 10:

If you are tired of trying to install Windows 10 but your efforts are still unsuccessful, there is a possibility that the current version of Windows 10 is not compatible with your system hardware. If you were previously using an earlier version of Windows such as Windows XP, Windows Vista, Windows 7, or Windows 8.1, check the minimum system requirements:

• Processor: 1GHz or System on Chip (SoC)
• Memory: 1GB for 32-bit or 2GB for 64-bit
• Storage: 32GB for 64-bit or 32-bit
• Graphics card: DirectX 9 or higher with 1.0 . WDDM driver
• Display: 800×600

Ways to install Windows 10 on your computer:

Upgrade Windows 7 or 8 to Windows 10:

In case you are upgrading Windows 10 from Windows 7, 8 or earlier versions, you may not need to re-enter the product key to complete the setup. All you need is a stable internet connection and Windows 10 will automatically activate after the update.

• Go to Settings
• Click Update and Security
• Click Activate
• From the “Windows” section, make sure your computer is activated.

After confirming this, you need to follow a series of steps that may allow you to convert Windows 7 or 8 to Windows 10. See:

1. First, open your browser and go to https://www.microsoft.com/en-us/software-download/windows10
2. Click the “Download the tool now” option under “Create Windows 10 installation media”
3. Select “Run” and you need an administrator account for this
4. Now on the “License Terms” page, click “Accept”
5. On the next screen called “What do you want to do?”, select Upgrade this PC now, and then select Next.
6. After downloading and installing the tool, you should see Windows 10 set up on your desktop.

Important Note: if you do not have a license for Windows 10, you can purchase a copy of it from https://www.microsoft.com/en-us/windows/get-windows-10. On the other hand, if you’re trying to upgrade Windows 10, you don’t need to enter a product key.

• Once the installation begins, you’ll see a summary of all the options you’ve selected. Select “Change what to keep” if you want to change anything and you choose to keep your personal apps and files or Keep only personal files or choose Keep nothing during the upgrade.
• Click Save and close all apps and files, then click Settings.
• Wait, because this process takes time to complete and your system will reboot a few times.
• Click Install
• Do not turn off the PC.

Clean install Windows 10:

A clean install is a more stable option than upgrading your old operating system. However, it removes everything. When Reinstalling Windows 10 from scratch, the system will restore and all data in the hard drive will be erased. So one has to back up the whole data so you can prevent data loss.

Although it deletes every block of data, it is the best option to avoid driver problems and incompatibility. So, to eliminate these risks, it is advisable to start the installation of Windows 10 completely.

Now let’s discuss how to set the correct boot order:

Before starting to install Windows 10 on your system using USB bootable media, you need to configure Basic Input/Output System (BIOS) and Unified Extensible Firmware Interface (UEFI) ) to adjust the boot order accordingly.

To change the BIOS boot order you need to follow the method provided here:

1. Turn on your device.
2. Press one of the function keys (F1, F2, F3, F10 or F12), the ESC key, or the Delete key while Boot Process is in progress.
3. Also open Boot Settings inside BIOS,
4. Now set the boot order to start the Windows 10 installation files with USB media.
5. Click Save to apply the changes.

After you complete the steps, the USB bootable media files will start.

Change boot order using UEFI:

Follow these steps to open the UEFI environment:

1. Go Setting
2. Open Update and security
3. Click The recuperation
4. Now, from “Advanced Startup”, click Restart now
5. Click troubleshoot
6. Select Advanced Options
7. Select Install UEFI Firmware
8. Click Restart
9. Now, from the firmware, open the Startup settings
10. Set the boot order to start the installation files from the USB media.
11. Click to save”

After you complete the steps, the UEFI-based system should be able to boot from the USB.

Access UEFI on Windows 8.1:

Use the steps given below to access the UEFI environment to boot your device:

1. Go to Settings
2. Select Update and restore
3. Click Restore
4. Now under “Advanced Startup” click “Restart” now
5. Click Troubleshoot
6. Tap Advanced Options
7. Select Install UEFI Firmware
8. Click Restart
9. Now, just below the firmware, click on Startup Settings
10. Select Boot Order to start the installation from USB media
11. Finally, save the changes

The next important thing you need to do before you start a clean install of Windows 10, you need to disconnect the unnecessary peripherals that came with your device.

Disconnect unnecessary peripherals

Peripherals associated with your device may interrupt the installation process. It is important to disconnect peripherals that are not in use such as removable storage, USB or Bluetooth, printers, cameras, scanners, etc. For a clean installation, all you need is a monitor, keyboard, mouse and stable internet connection.

How to create a USB bootable media for a clean install:

While performing a clean install of Windows 10, you need to prepare a USB drive bootable media first. You can use the Media creation tool from the official Microsoft website. Just go to https://www.microsoft.com/en-us/software-download/windows10, click download now and follow the onscreen instructions to install the tool.

Start a clean install of Windows 10:

After preparing the bootable media for the Windows Installation, you need to follow the steps below to complete the process:

1. Connect to bootable media
2. Now click any random key to start the media
3. Click “Next” on Windows setup
4. Click Install Now
5. Now, provide the product key, if you are installing Windows for the first time. If you’re doing a reinstall, click I don’t have a product key to continue
6. Click next
7. Select version of Windows 10
8. Click next
9. Select I accept the license terms
10. Click Next
11. Select the Custom option: Install Windows only (Advanced).
12. Select the Windows installation partition and then press Delete
13. Click Yes
14. Select an empty drive
15. Click next

Once the Windows 10m installation is complete, the setup will automatically start on Windows 10 on your system.

What to do after installing Windows 10:

Once installed, the next thing is to activate Windows 10. To check the activation, follow the steps provided here;

1. Go to your system’s Settings
2. Click Update and Security
3. Click Activate
4. When Windows 10 is successfully installed, you will receive one of the messages from below:

• “Windows is activated with a digital license: The installation has been activated, but the license is not linked to your Microsoft account.”
• “Windows is activated with a digital license associated with your Microsoft account: The installation has been activated and the license is linked to your Microsoft account.”

Now you need to check for updates:

1. Go to Settings
2. Click Update and Security
3. Select Windows update
4. Click Check for Updates

Then it moves on to check your device’s driver using the given steps:

1. Click Start
2. Search for Device Manager and click on the first option
3. Make sure no option is marked as yellow and red and no option is marked as unknown

Important tip: make sure you have the latest drivers installed for your device for a smooth experience with Windows 10.

Categories: How to
Source: vothisaucamau.edu.vn